Front Cross-Member

TIGHTENING SPECIFICATIONS
Center Member Mounting Bolts:
Front Bolts 88 Nm (64 ft.lbs.)
Rear Bolts 52 Nm (38 ft.lbs.)
Front Roll Stopper Mounting Bolts 44 Nm (32 ft.lbs.)
Front Roll Stopper Center Bolt/Nut 69 Nm (51 ft.lbs.)
Rear Roll Stopper Mounting Bolts 44 Nm (32 ft.lbs.)
Rear Roll Stopper Center Bolt/Nut 69 - 78 Nm (50 - 56 ft.lbs.)
Control Arm to Crossmember 100 - 120 Nm (72 - 87 ft.lbs.)
Control Arm Pivot Mounting Bolt 70 - 90 Nm (52 - 69 ft.lbs.)
Lower Stopper Nuts 88 Nm (64 ft.lbs.)
Coupling Bolt For Steering Gear Joint 18 Nm (13 ft.lbs)
Pressure Hose to Pump Connector 24 Nm (18 ft.lbs.)
Tie Rod End Nut 24 - 33 Nm (18 - 24 ft.lbs.)