General Specifications

SERVICE SPECIFICATIONS
Cylinder Head Bolt Shank Length 96.4 mm (3.80 inch)
Cylinder Head Flatness Of Gasket Surface:
Standard Value Less Than 0.03 mm (0.0012 inch)
Limit 0.2 mm (0.008 inch)
Cylinder Head Grinding Limit Of Gasket Surface:
Total Resurfacing Depth Of Both:
Cylinder Head and Block 0.2 mm (0.008 inch)
Cylinder Head:
Overall Height 119.9 - 120.1 mm (4.720 - 4.728 inch)

TORQUE SPECIFICATIONS
Cylinder Head Bolt:
Step 1 74 Nm (54 ft. lbs.)
Step 2 Completely Loosen
Step 3 20 Nm (15 ft. lbs.)
Step 4 + 90°
Step 5 + 90°