Cylinder Block Dimensions
SERVICE SPECIFICATIONSBore 86.5 mm (3.41 inch)
Stroke 100 mm (3.94 inch)
Piston Displacement 2,351 cm3 (143.4 cubic inch)
Compression Ratio 9.5
Bearing Cap Bolt Shank Length Maximum 71.1 mm (2.80 inch)
Piston To Cylinder Clearance 0.02 - 0.04 mm (0.0008 - 0.0016 inch)
Cylinder Block Flatness Of Gasket Surface:
Standard Value 0.05 mm (0.0020 inch)
Limit 0.1 mm (0.004 inch)
Cylinder Block Grinding Limit Of Gasket Surface:
Total Resurfacing Depth Of Both Head And Block 0.2 mm (0.008 inch)
Cylinder Block Overall Height 289.9 - 290.1 mm (11.413 - 11.421 inch)
Cylinder Block Inside Diameter 86.5 mm (3.41 inch)
Cylindricity 0.01 mm (0.0004 inch) Or Less
TORQUE SPECIFICATIONS
Rear Plate 11 Nm (8 ft. lbs.)