General Specifications
SERVICE SPECIFICATIONSCylinder Head Flatness Of Gasket Surface:
Standard Value 0.03 mm (0.0012 inch)
Limit 0.2 mm (0.008 inch)
Cylinder Head Grinding Limit Of Gasket Surface:
Includes/Combined With Cylinder Block Grinding 0.2 mm (0.008 inch)
Cylinder Head Overall Height 132 mm (5.20 inch)
Cylinder Head Oversize Valve Guide Hole (Both Intake and Exhaust):
0.05 12.05 - 12.07 mm (0.4744 - 0.4752 inch)
0.25 12.25 - 12.27 mm (0.4823 - 0.4831 inch)
0.50 12.50 - 12.52 mm (0.4921 - 0.4929 inch)
Cylinder Head Oversize Intake Valve Seat Ring Hole:
0.3 36.30 - 36.33 mm (1.4291 - 1.4303 inch)
0.6 36.60 - 36.63 mm (1.4409 - 1.4421 inch)
Cylinder Head Oversize Exhaust Valve Seat Ring Hole:
0.3 33.30 - 33.33 mm (1.3110 - 1.3122 inch)
0.6 33.60 - 33.63 mm (1.3228 - 1.3240 inch)
TORQUE SPECIFICATIONS
Engine Hanger Bolt 13 Nm (9 ft. lbs.)
Bearing Cap, Front and Rear Bolt 20 Nm (14 ft. lbs.)
Bearing Cap Bolt No.2, 3, 4 11 Nm (8 ft. lbs.)
Cylinder Head Bolt 108 Nm (80 ft. lbs.)