Toe-In

Measure the alignment with the vehicle parked on level ground.
The rear suspension and wheels should be serviced to normal condition prior to wheel alignment.
Standard value: 0 to 5 mm (0 to .20 inch)

If outside the standard value, adjust by the following procedure.
1. Be sure to adjust the camber before adjusting the toe-in:
2. Adjust by turning the toe adjusting bolt (mounting bolt on the inside of the control link).
L.H.: Turning clockwise toe-in direction.
R.H.: Turning clockwise toe-out direction.
The scale has graduations of approximately 2.6 mm (.10 inch).