With Generic Scan Tool

PRECAUTIONS:
1. When battery voltage is low, no detection of failure is possible. Be sure to check the battery for voltage and other conditions before starting the test.
2. Diagnostic item is erased if the battery or the engine control module connector is disconnected. Do not disconnect the battery before the diagnostic result is completely read.

CAUTION: Turn the ignition switch off before connecting or disconnecting the scan tool.




1. Connect the scan tool to the data link connector.
2. Turn the ignition switch to ON.
3. Take a reading of the diagnostic output.
4. Repair the problem location, referring to the diagnostic chart.
5. After turning the ignition switch once to OFF, turn it back to ON.
6. Erase the diagnostic trouble code.
7. Recheck to be sure that the condition is normal.