Radiator: Service and Repair

1. Drain engine coolant, then remove drain plug and radiator cap.
2. Remove overflow tube and reserve tank, then upper and lower radiator hoses.
3. On models equipped with automatic transaxle, remove ATF cooler hose, then plug hose and radiator nipple.
4. On models equipped with air conditioning, disconnect condenser fan connector.
5. Disconnect radiator fan connector, then remove upper insulator and radiator assembly.
6. Remove resistor.
7. On models equipped with air conditioning, remove condenser fan motor assembly.
8. Remove radiator fan motor assembly.
9. Remove lower insulator, fan, radiator fan motor and shroud.
10. Reverse procedure to install.