Mechanical Specifications

Accelerator cable free play 0.04 - 0.08 in. (1 - 2 mm)

Firing order 1-3-4-2

Idle speed [1] 750 ± 100 RPM

Idle speed W/ AC ON [1]
M/T (in neutral) 850 RPM
A/T (in D range) 700 RPM

Idle mixture [2]



TIGHTENING TORQUE SPECIFICATIONS:

Accelerator cable adjustment bolts 3 - 4 ft.lbs. (4 - 6 Nm)
Air outlet fitting 7 - 10 ft.lbs. (9 - 14 Nm)
Exhaust fitting 1 - 1 ft.lbs. (40 - 47 Nm)
Fuel pressure regulator installation bolts 5 - 7 ft.lbs. (7 - 10 Nm)
Fuel rail installation bolts 7 - 9 ft.lbs. (10 - 13 Nm)
High pressure hose to fuel filter 18 - 25 ft.lbs. (25 - 35 Nm)
High pressure hose to fuel rail 6 - 7 ft.lbs. (8 - 10 Nm)
High pressure hose to fuel tank 22 - 29 ft.lbs. (30 - 40 Nm)
Main fuel line to fuel filter 22 - 29 ft.lbs. (30 - 40 Nm)
Oil pipe to engine 10 - 14 ft.lbs. (14 - 19 Nm)
Oil pipe to turbocharger 10 - 14 ft.lbs. (14 - 19 Nm)
Oil pipe mounting bolt 6 - 7 ft.lbs. (8 - 10 Nm)
Oil return pipe 6 - 7 ft.lbs. (8 - 10 Nm)
Throttle body to surge tank bolts 7 - 9 ft.lbs. (10 - 13 Nm)
TPS mounting screws 1.1 - 1.8 ft.lbs. (1.5 - 2.5 Nm)
Turbocharger to engine 40 - 47 ft.lbs. (55 - 65 Nm)
Wastegate actuator 7 - 9 ft.lbs. (10 - 13 Nm)
Water pipe "A" mounting bolt 7 - 9 ft.lbs. (10 - 12 Nm)
Water pipe "A" to turbocharger 20 - 25 ft.lbs. (28 - 34 Nm)
Water pipe "B" to turbocharger 20 - 25 ft.lbs. (28 - 34 Nm)
Water pipe "B" to water inlet pipe 29 - 36 ft.lbs. (40 - 50 Nm)

[1] Refer to ADJUSTMENT PROCEDURES.
[2] Not adjustable.