Cruise Control Servo: Service and Repair

REMOVAL







1. Detach the speed control cable.
1 Disconnect the cable from the throttle lever.
2 Detach the cable from the bracket.







2. Disconnect the air intake temperature sensor electrical connector.







3. Detach the speed control cable from the securing clip.







4. Disconnect the speed control actuator electrical connector.







5. Remove the speed control actuator bolt.







6. Detach the speed control actuator.







7. Remove the speed control cable cap from the speed control actuator.
1 Depress and hold the locking clip.
2 Turn the cap counterclockwise.







8. Remove the speed control cable from the speed control actuator pulley.
1 Release the cable locking spring.
2 Push the cable end out of the pulley slot.

INSTALLATION







1. To install, reverse the removal procedure.