Manual Bleed - Front Disc Brake Caliper Only

1. Attach a rubber drain hose to the front disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with clean brake fluid.
2. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.





3. CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.

Loosen the front disc brake caliper bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake pedal while tightening the front disc brake caliper bleeder screw.
1 Repeat until clear, bubble-free fluid flows.





4. Tighten the front disc brake caliper bleeder screw.