Brake Fluid: Service and Repair

LEVEL

CAUTION: If brake fluid is used that is not DOT 3, permanent damage to the brakes could occur.

^ Always check the fluid level in the master cylinder before performing the test procedures. If the fluid level is not at or near the MAX line on the side of the brake master cylinder reservoir, add high performance DOT-3 motor vehicle brake fluid.
^ If the fluid is low it may be due to shoe and lining wear. If fluid is extremely low or empty or fluid has to be added often, check system for a leak. Testing and Inspection
^ If brake fluid is low, the red BRAKE indicator will illuminate.
^ To add brake fluid, clean and remove cap and pour clean brake fluid into the top of the brake master cylinder reservoir.
^ Fill the brake master cylinder reservoir to the MAX line with high performance DOT-3 brake fluid.