Condenser HVAC: Service and Repair

Spring Lock Coupling Disconnect Tool (1/2 Inch):

Special Service Tool(s) Required

Removal
1. Recover the refrigerant from the A/C system.
2. Remove battery.
3. Disconnect the two refrigerant lines at fittings on RH side of condenser core.
4. Remove two bolts retaining radiator to upper support and tilt radiator rearward.
5. Disconnect wire harness from upper radiator support and position aside.
6. Remove two screws retaining A/C condenser core to upper radiator support and remove A/C condenser core from vehicle.




Installation
1. Position the A/C condenser core assembly to the radiator supports . Install the retaining screws and tighten to 2.7-3.7 N.m (24-32 lb-in).
2. Connect the refrigerant lines to the A/C condenser core assembly using procedures for connecting spring lock couplings.
3. Install the radiator.
4. Connect the battery ground cable.
5. Leak test, evacuate and charge the refrigerant system following the recommended procedures and safety precautions.