Front Wiper Motor

Removal

1. Turn wiper motor ON, then when blades are straight up, turn key OFF.
2. Remove arm and blade assemblies, then disconnect battery ground cable.
3. Remove locknut from motorshaft, then remove motor arm from motor.
4. Remove three motor attaching bolts, then the motor.
5. Disconnect electrical connector from motor.

Installation

1. Connect electrical connector at motor, place motor in position and torque retaining bolts to 7-9 ft. lbs.
2. Connect wiper motor arm to shaft of windshield wiper motor, ensuring that key of motor arm is aligned to shaft, and torque locknut to 13-15 ft. lbs.
3. Connect battery ground cable.
4. Before installing arm and blade assembly on pivot shaft, cycle motor to ensure that it is in P position.