Clutch Disc: Service and Repair

1. Remove transaxle as described.
2. Install flywheel locking tool T84P-6375-A or equivalent.
3. Using a suitable clutch pilot tool to hold clutch plate in position, alternately and evenly loosen pressure plate attaching bolts.
4. Remove pressure plate, then remove clutch pilot tool and clutch plate.

Fig. 4 Positioning clutch plate to flywheel:

5. Reverse procedure to install. Apply lubricant C1AZ-19590-B or equivalent to clutch release bearing, and clutch disc and input shaft splines. Use care not to allow lubricant to contact clutch face. Position clutch disc to flywheel as shown in image. When installing pressure plate, torque pressure plate attaching bolts alternately and evenly to 13 to 20 ft lbs.