Cruise Control Servo Cable: Adjustments

1. Remove the speed control actuator cable clip.







2. Adjust the speed control actuator cable.
1. Ensure the throttle body cam is in the closed position.
2. Pull on the speed control actuator cable to remove any slack.
3. Back off the speed control actuator cable one notch.

NOTE:
^ The speed control actuator cable must not be pulled tight for proper operation.
^ The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.







3. Install the speed control actuator cable clip.
1. Hold the speed control actuator cable.
2. Insert the speed control actuator clip securely.