L. Final Assembly and Function Test

L. Final assembly and function test

1. Reinstall the passenger side paneling and floor covering in the load compartment.

^ See WIS document AR68.30-P-4780PA, "Removing and installing side paneling in rear".

2. Fold back the rear seat backrests.

3. Reinstall the floor covering at the transmission tunnel area on the passenger side.

4. Verify proper telephone operation per the following checklist:

^ Handset dialing is functioning correctly-Use an active telephone to dial a valid telephone number. Listen for a dial tone and ring.

^ Head unit dialing is functioning correctly-Use an active telephone to dial a valid telephone number. Listen for a dial tone and ring over the vehicle audio system and then end the call via the steering wheel controls.

^ Handset incoming/outgoing call audio is clear-Use an active telephone to dial a telephone number, connect and either speak to a live person or leave a voicemail message.

^ Hands-free incoming/outgoing audio is clear-Use an active telephone to dial a telephone number, connect and either speak to a live person or leave a voicemail message.

^ Automatic memory download is functioning-Connect the telephone to the vehicle and wait 3 minutes for the download to complete. After 3 minutes, check several random phonebook locations and match the received and dialed call list to the telephone's list. (It may be necessary to store a test number in the telephone handset for this feature to operate. Stored numbers should be available for dialing from the head unit after automatic download.)

^ Signal strength-Note the telephone signal strength before and after connected to the vehicle. The signal strength should stay constant or increase when the telephone is connected to the vehicle. If the signal strength decreases, a problem exists.