M. Final Assembly and Function Test

M. Final assembly and function test

1. In the cargo compartment, reinstall the Styrofoam(R) panel (if not sound system equipped) removed in Section C, step 2.

2. In the cargo compartment, reinstall the passenger side paneling, plastic cover over the electronics compartment behind the rear seat, and floor paneling.

^ See WIS document AR68.30-P-4600PB, Remove/Install paneling in trunk"

3. Reinstall the interior side paneling at the right and left side rear if applicable.

^ See WIS document AR68.30-P-4780PB, Removing and installing side paneling in rear"

4. Reinsert the floor covering at the transmission tunnel area on the passenger side.





5. Verify proper telephone operation per the checklist shown.