Voice Activated Cell Phone - Installation: Overview

Date: August 2OOO

Order No.: P-SI-82.70/143

Supersedes:

Group: 82

SUBJECT:
MODEL: 215.375/378
MODEL: YEAR 2001
VOICE ACTIVATED CELLULAR TELEPHONE INSTALLATION

WARNING:
Disconnecting the negative battery cable is not recommended due to otherwise extensive reprogramming requirements. WIRING HARNESSES WILL BE ELECTRICALLY ACTIVE. IT IS THEREFORE NECESSARY TO EXERCISE EXTREME CAUTION WHILE EXECUTING THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO. COULD RESULT IN SEVERE VEHICLE DAMAGE. PERSONAL INJURY OR DEATH FROM ELECTRICAL SHOCK. The ignition and radio power must remain OFF until the final test is performed.

Application specific D2B notes:

^ The CD changer and Tele Aid are pre-installed at the factory.

^ The telephone and voice recognition fibers are supplied as one complete assembly included in the telephone installation kit.

^ The fiber reconfiguration point is along the main amplifier harness just before the harness enters the left quarter panel.

^ Refer to S-SI-82.64/135, D2B Fiber Optic Configuration and Version Coding for instructions on proper handling and configuration of D2B fibers.