Check and Adjust Front Caster and Camber

NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.

INSPECTION
1. Follow Sequence of Steps For Performing Alignment
2. Check vehicle level at front axle and rear axle. Adjustments
3. Install measuring device tool No. 140 589 03 21 00, or equivalent, for caster (04) in the fixing points on the steering knuckle.
4. Check camber and caster.

ADJUSTMENT





Adjust camber (front cam bolt, 19) and caster (rear cam bolt, 20) at the wishbone mount.

NOTE:
^ The wheel spreader must not be used to adjust the toe-in.
^ If the specified value of camber or caster cannot be adjusted check upper wishbone, steering knuckle and body for accident damage and the supporting joints and follower joints for wear.

SPECIFICATIONS
Alignment:
- Camber With 0° Toe In: 0°20' (-20' / +10')
- Caster With 0° Toe In: 10°20' ± 30'
- Caster With Wheels Turned: 9°40' ± 30'
Tightening:
- Lock Nut Of Cam Bolt: 180 Nm