Starter Motor: Service and Repair

Preliminary work:
Rear engine compartment panel removed.






Ground cable at battery
disconnect, connect.

Bolts (1)
unscrew, screw in.

Nut (2)
unscrew, screw on.

Shield (3), if present
remove, install.

Electric wiring (4 and 5) at starter (M1)
disconnect, connect.

Screws (6)
unscrew

Starter (M1)
take out from below, insert from below; when doing this, take off existing spacer disc(s) (8) and splash guard (7), if necessary, and fit on.