Rear

NOTE: Refer to Air Bags and Seat Belts, Service Precautions. Restraints and Safety Systems

1. Disconnect battery ground cable.
2. Remove rear seat and rear seat backrest.
3. Disconnect wire connector.
4. Remove clip wire fasteners.
5. Remove wire lead downward through rubber grommet in floor.
6. Remove hexagon socket screws of wheel speed sensor.
7. Remove rear wheel speed sensor complete with lead.
8. Reverse procedure to install, noting following:
a. Make sure no metallic particles are on magnetic edge of speed sensor.
b. Replace rubber O-ring on sensor and connector if necessary.
c. Replace self locking hexagon socket screws.