Front Shock Absorber Disposal

FRONT SHOCK ABSORBER DISPOSAL

1. Place the shock absorber on a level surface or with the piston pointing downwards.

2. Drill a 2-3 mm {0.08-0.11 in} hole at a point 20-30 mm {0.8-1.1 in} from the bottom of the tube, so that the gas can escape.






WARNING:
- Whenever drilling into a shock absorber, wear protective eye wear. The gas in the shock absorber is pressurized and could spray metal chips into the eyes and face.

3. Turn the hole downwards.

4. The oil can be collected by moving the piston rod several times up and down and cut the tube at the end.

5. Dispose of waste oil according to local waste disposal laws.