Suspension: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
1. The removal and installation procedures for the wheels and tires are not mentioned in this section When a wheel is removed, retighten it to 90 - 110 Nm (9 - 12 kgf-m, 66 - 86 ft. lbs.).

SUSPENSION LINKS REMOVAL/INSTALLATION
1. Tighten any part of the suspension that uses rubber bushings only after the vehicle has been lowered and unloaded.

NOTE: Unloaded ... Fuel tank is full. Engine coolant and engine oil are at specified levels. Spare tire, jack and tools are in designated position.

POWER STEERING COMPONENTS REMOVAL/INSTALLATION
1. If any power steering fluid line has been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron II), bleed the fluid line, and inspect for leakage after the procedure has been completed.