Cooling System: Testing and Inspection

ENGINE COOLANT LEAKAGE INSPECTION

1. Inspect the coolant level.
2. Remove the radiator cap.





3. Connect a radiator cap tester and the Special Service Tool (SST) to the radiator filler neck.

CAUTION:
- Applying more than 123 kPa (1.25 kgf/cm2, 17.7 psi) can damage the hoses, fittings, and other components, and cause leaks.

4. Apply pressure to the radiator.
Pressure: 123 kPa (1.25 kgf/cm2, 17.7 psi)
5. Verify that the pressure is held.
- If not, inspect the system for coolant leakage.