Conditions That Are Not Malfunctions

Conditions That are Not Malfunctions
The TCS warning light may illuminate under any of the following conditions:
- When TCS OFF is selected by the TCS OFF switch. The warning light will be off and the TCS will be ready for operation when the TCS OFF switch is pressed again.
- When (while the vehicle is jacked up or stuck) the front wheels only are spun for 60 seconds or more. In this case, turn the ignition switch to OFF, then back to ON, and drive the vehicle at higher than 20 kph {1 2.4 mph} and verify that the ABS warning light goes off. There will also be no diagnostic trouble code entry made to the control module memory.
- When there is insufficient battery voltage. The warning light will be off and the TCS will be ready for operation when the battery voltage rises. There will also be no diagnostic trouble code entry made to the control module. However, DTC 63 will be memorized when the vehicle is driven at higher that 6 kph {3.7 mph}.
- When the engine coolant temperature is extremely low. The warning light will be off and the TCS will be ready for operation when the engine coolant temperature rises. There will also be no diagnostic trouble code entry made to the control module memory.