Steering: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
- The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 89 - 117 Nm {9.0 - 12.0 kgf.m, 66 - 86 ft. lbs.}.

POWER STEERING COMPONENTS REMOVAL/INSTALLATION
- If any power steering fluid line has been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron(R) II), bleed the fluid lines, and inspect for leakage after the procedure has been completed.

CONNECTORS DISCONNECTION/CONNECTION
- Disconnect the negative battery cable before doing any work that requires handling of connectors. Connect the negative battery cable only after the work is completed.