13. IG Switch Turned ON, ABS/TCS/TCS OFF Light Don't Illuminate

CAUTION: For the steps which have an asterisk (*), Inspect the connection of the connector with the terminal and for any damage first. If the connection Is poor, securely connect them, or repair or replace the appropriate parts as necessary. Wiggle and pull the wire harness to inspect each wire for corrosion, bent or loose terminals and poor wire terminal crimps.




CAUTION: Recheck the diagnostic trouble code after repair completion.

NOTE:
- If any symptoms have occurred in the past but are now okay, poor harness could be the possible cause and thus ABS CM is normal.