Pressure Regulating Solenoid: Service and Repair

SOLENOID VALVES REMOVAL / INSTALLATION (GF4A-EL)
1. Remove the control valve body.
2. Remove the solenoid valves.
3. Apply ATF to a new O-ring and install it on the solenoid valve.
4. Install the solenoid valve in the control valve body.

Tightening torque 6.5 - 7.8 Nm (66 - 80 kgf-cm, 58 - 69 inch lbs.)

5. Install the control valve body.
6. Pour in ATF and, with the engine idling, check the ATF level and check for leaks.
7. Carry out the mechanical system test.
8. Carry out the road test.