Fuel Pipe Disassembly Note

1. Inspect that the fuel pipe joint area is free of foreign material. Clean as necessary.




2. Squeeze the tabs of the retainer and disconnect the fuel pipe connector.




3. Cover the disconnected connector and pipe to prevent them from scratched or contaminated with foreign material.

CAUTION
- Removing the retainer from the disconnected pipe will reduce the effectiveness of this retainer. The retainer must be replaced when any of the followings apply.
1. Retainer has been removed.
2. Scratches or damages have been observed on this retainer.
3. Fuel pump component has been replaced.
4. Fuel tank has been replaced.
5. Fuel pipe has been replaced.

4. If removed of the retainer is required, remove it in the following procedure.

CAUTION
- Removing the retainer by using a tool can damage the pipe and cause fuel leakage. Remove the retainer by opening the tabs outward by hand.




(1) Open the tabs of the retainer outward.
(2) Remove and discard the retainer.