Interior - Inside Rear View Mirror Loose

S002/98

REAR VIEW MIRROR LOOSE

APPLICABLE MODELS

All 1995 - 96 Millenia

DESCRIPTION

The rear view mirror may be loose. The cause may be a loose set screw or the holder may have been exposed to excessive force which may have deformed the holder. Customers complaining of this concern should have the vehicle inspected and if necessary, repaired according to this bulletin.

REPAIR PROCEDURE

1. Remove the rear view mirror according to the Workshop Manual.

2. Inspect the set screw.

^ If loose, proceed to step 3.

^ If the set screw is tight, proceed to step 5.

3. Replace the holder and screw with new parts.

4. Apply double-sided tape to the back of the holder to secure the part in place during installation.

5. Install rear view mirror.

6. Verify repair.





PARTS INFORMATION

NOTE:
The set screw has thread sealer applied.

WARRANTY INFORMATION





This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term information.





Disclaimer