Thermostat: Service and Repair

Legend
1. Air cleaner assembly
2. Water inlet pipe
3. Engine harness bracket
4. Thermostat cover
5. Thermostat

REMOVAL / INSPECTION / INSTALLATION
1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the image.
4. Install in the reverse order of removal, referring to Installation Note.





Installation Note Thermostat
Install the thermostat into the thermostat case with the jiggle pin and projection at the top.

Steps After Installation
1. Fill the radiator and radiator reservoir with the specified amount and type of engine coolant.
2. Start the engine and check for coolant leaks.