Radiator: Service and Repair

1. On models with anti-theft audio system, refer to Technician Safety Information for system deactivation procedure.
2. Disconnect battery ground cable, then drain engine coolant into suitable container.
3. Remove upper seal board.
4. Remove radiator reservoir hose, then radiator reservoir.
5. Disconnect fan motor electrical connector.
6. Remove coolant fan, then condenser fan assemblies.
7. Remove oil cooler and radiator hoses.
8. Remove radiator bracket, then radiator.
9. Reverse procedure to install. Fill radiator and radiator reservoir with suitable engine coolant as specified, then run engine and check for coolant leaks.