With LJ4A-El & GF4A-El

1. Remove air cleaner assembly, then shift selector lever to Park position.
2. Loosen nut A, Fig. 5, then push selector cable in direction of arrow until it doesn't move any further.
3. Position selector cable so there is no load in direction of arrows, Fig. 6, then torque nut to 12 - 14 ft.lb.
4. Install air cleaner assembly.
5. Shift selector lever from park position to L range. Ensure there is no interference from surrounding components.

Fig. 5 Selector Cable Adjustment Nut Location:

Fig. 6 Selector Cable Adjustment: