Cylinder Head Assembly
CYLINDER HEADTighten the cylinder head bolts in the order in 6 steps in the order shown in the figure.
BOLT RE-USABILITY
NOTE: The cylinder head bolts must be replaced with new bolts. The bolts are torque-to-yield designed and cannot be reused.
CAMSHAFT CAP
RH
Temporarily tighten the camshaft cap bolts evenly in the order shown in several passes.
Tightening torque 8.5-11.5 Nm {87-117 kgf-cm, 76-101 in-lbf}
LH
Temporarily tighten the camshaft cap bolts evenly in the order shown in several passes.
Tightening torque 8.5-11.5 Nm {87-117 kgf-cm, 76-101 in-lbf}
Intake Manifold Specifications
Exhaust Manifold Specifications
Camshaft Gear/Sprocket Specifications