Fill

FILL





Warning:
^ Do not mix oil types. Any mixture or any unapproved oil can lead to seal deterioration and leaks. A leak can ultimately cause loss of fluid, which can result in a loss of power steering assist.

1. Fill the reservoir.
1. Use MERCON - Automatic Transaxle Fluid (ATF).





2. Remove the FUEL fuse to disable the vehicle.
3. Raise the front wheels off the floor.





Caution:
^ Do not crank the engine for more than 15 seconds at a time. Allow the starter to cool for 1 minute before cranking again. Premature starter failure can occur.

Caution:
^ Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump can occur.

4. Turn the steering wheel from stop-to-stop while cranking the engine.
5. Lower the vehicle.





Caution:
^ Do not overfill the reservoir.

6. Fill the reservoir.
1. Use MERCON - ATF.
7. Install the fuel pump relay.
8. Clear the diagnostic trouble codes (DTCs).