5R44E/5RR5E Drive Mode Procedures For GR_CM

5R44E/5RR5E DRIVE MODE Procedures for GR_CM
Following operating instructions from the WDS or equivalent tester menu screen.
^ Select "Output State Control."
^ Select "Trans - DRIVE MODE."
^ Select "PIDs" to be monitored.
^ Monitor all selected PIDs during test.
^ Select "Parameters - GR_CM."
^ Select Value " 1-5."
^ Press "SEND" to send command.
^ Re-Select Value " 1-5."
^ Press "SEND" to send command.
^ Select "XXX" to cancel at any time.
^ Press "SEND."