Transaxle Support Insulator-Lower, Rear
TRANSAXLE SUPPORT INSULATOR-LOWER, REAR, 2.0L ZETECRemoval
1. Remove the battery tray.
2. Disconnect the breather tube and Mass Air Flow (MAF) / Intake Air Temperature (IAT) sensor.
3. Remove the intake tube and air cleaner cover.
4. Remove the air cleaner assembly.
5. Remove the bolts from the rack.
6. Remove the bolts and nuts from the mount, and remove the mount.
Installation
Note: Prior to tightening the mount nuts install the mount bolt for correct alignment.
1. Install a new mount and bolts.
1. Install the mount.
2. Loosely install the bolt for correct alignment.
3. Install the nuts and bolt.
2. Install the bolts to the rack.
3. Install the air cleaner assembly.
4. Install the intake tube and air cleaner cover.
5. Connect the breather tube and Mass Air Flow (MAF) / Intake Air Temperature (IAT) sensor.
Note: Before installing the battery tray check the vent tube hose for any obstructions, kinks, or incorrect routing position.
6. Install the battery tray.