Output State Check

The Output State Check aids in servicing output actuators associated with the EEC system, enabling technicians to energize and de-energize most system output actuators on command. This mode is entered after all codes have been received from KOEO and Continuous Self-Tests. After codes have displayed, leave Self-Test activated and depress the throttle. Each time the throttle is depressed (to wide open throttle, WOT), output actuators will change state from energized to de-energized or vice versa. The procedure is as follows:

1. Enter Self-Test.
2. Code output ends.
3. Do brief WOT.
4. EEC output to actuators energized.
5. Do brief WOT.
6. EEC output to actuators de-energized.