4 Wheel Drive

1. Disconnect battery ground cable.
2. Remove power steering belt, then the power steering pulley.
3. Disconnect alternator connectors, then remove alternator.
4. Remove engine undercovers.
5. Disconnect automatic transmission cooler lines from power steering pump, then remove the power steering pump, leaving the hoses still attached.
6. Disconnect front propeller shaft.
7. Remove wiring harness bracket bolts.
8. Disconnect transmission oil cooler lines from engine.
9. Disconnect electrical connectors from starter motor.
10. Remove fuel and brake line cover.
11. Remove starter mounting bolts and the starter.
12. Reverse procedure to install.