Caliper Disassembly and Assembly, Rear

Brake Caliper

Special Tool(s):

Material:

Disc Brake System - Exploded View:

Disassembly

WARNING: Use of any other than approved DOT 3 or DOT 4 brake fluid will cause permanent damage to brake components and will render the brakes inoperative.

WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately.

CAUTION: Brake fluid is harmful to painted or plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water.

1. Remove the brake caliper.
2. Drain the remaining brake fluid from the brake caliper.





3. Using the special tool, turn the brake piston counterclockwise.
4. Remove the brake caliper piston and piston seal.

Assembly





1. Use the special tools to install the seal.

2. CAUTION: Be careful not to damage or dislodge the piston seal.

Install the brake piston.
3. Install the brake caliper.