Glove Compartment: Service and Repair

GLOVE COMPARTMENT

Removal and Installation
1. Disconnect the battery.
2. Remove the instrument panel trim panel.
3. Release the glove compartment arm assist cable from the assist arm.
4. Lift up on the glove compartment door assist arms and lower the glove compartment.
5. Remove the 2 glove compartment assist cable bracket screws.
6. Remove the 5 screws and the glove compartment bin.
7. Disconnect the glove compartment lamp electrical connector.
8. Remove the 5 bolts and the glove compartment door frame.
- To install, tighten to 5 Nm (44 lb-in).

9. To install, reverse the removal procedure.