Front Bumper Cover / Fascia: Service and Repair

FRONT BUMPER COVER

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Remove the headlamps.
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Remove the 6 screws, the pin-type retainer, and the front valance panel.
4. Remove the 6 lower fender splash shield screws.
5. Disconnect the 2 fog lamp electrical connectors.
6. Remove the 4 front bumper cover bracket bolts from the fenders.
- To install, tighten to 7 Nm (62 lb-in).

7. Pull the center tabs downward and the outboard tabs on each side outward and remove the front bumper cover.
8. To install, reverse the removal procedure.