Lighting Control Module

REMOVAL
1. Disconnect the battery ground cable.

CAUTION:
^ Prior to removal of module, it is necessary to upload module configuration information to the New Generation STAR (NGS) Tester. This information needs to be downloaded into the new module once installed.
^ Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.







2. Remove the instrument panel steering column cover.
^ Remove the screws.







3. Remove the Lighting Control Module (LCM).
1 Remove the screws.
2 Carefully remove the LCM from the instrument panel and disconnect the electrical connectors.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the New Generation STAR (NGS) Tester into the new module.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 10 miles (16 km) or more to relearn the strategy.