Customer Safety Information

WARNING:
- Air bag modules with discolored or damaged cover deployment doors must be replaced, not repainted.

- If ever a part is replaced and the new part did not correct the condition, re-install the original part and perform the diagnostic procedure again.

- Vehicle sensor orientation is critical for proper system operation. If a vehicle equipped with an air bag system is involved in a crash where the fenders or grille area have been damaged, inspect the sensor mounting brackets for deformation. If damaged, the sensor should be replaced whether or not the air bag is deployed. In addition, ensure that body structure in the area of sensor mounting is restored to its original condition.

- Prior to attempting diagnostic proveout on a serviced vehicle, thoroughly check all sensors and wiring for damage and pinch condition which may cause the air bag diagnostic monitor internal fuse to blow.

CAUTION: After all service, "Verify The Air Bag Indicator". This means turn the ignition switch to RUN and count the flashes only after the code (series of flashes) has cycled twice. If the air bag indicator comes on continuously for 4 to 8 seconds and then goes out, the system is functioning properly and all faults have been serviced.

STEERING COLUMN

WARNING: If the collision involved an air bag deployment, the steering column may have been loaded sufficiently to deform steering column mounting brackets or damage column wiring. An inspection should be made of column structure and air bag sliding contact wiring to ensure that any damaged components are replaced.