Rear Window Wiper Motor

REAR WINDOW WIPER MOTOR

Removal and Installation
1. Remove the rear wiper pivot arm.
2. Remove the rear wiper pivot arm cover.
3. Remove the rear wiper motor nut.
- To install, tighten to 7 Nm (62 lb-in).

4. Remove the seal.
5. Remove the rear wiper motor trim cover.
6. Remove the 2 rear wiper motor assembly nuts.
- To install, tighten to 7 Nm (62 lb-in).

7. Disconnect the electrical connector and remove the rear wiper motor assembly.
8. To install, reverse the removal procedure.