Front Door Window Regulator: Service and Repair

FRONT DOOR WINDOW REGULATOR

Removal and Installation

CAUTION: The LF door power window regulator motor must be reinitialized whenever the LF window regulator is removed from the vehicle.

1. Remove the front door window glass.
2. Disconnect and position aside the window regulator motor electrical connector.
3. Remove the 6 window regulator assembly nuts.
- To install, tighten to 10 Nm (89 lb-in).

4. Remove the front door window regulator.
5. To install, reverse the removal procedure.
6. If the work was carried out on the LF door, reinitialize the LF window regulator.