Front Door Window Motor: Service and Repair

FRONT DOOR WINDOW REGULATOR MOTOR

Removal and Installation

CAUTION: The LF door power window regulator motor must be reinitialized whenever the LF motor is removed from the vehicle. A new LF window regulator motor will be in a proportional up/down mode until initialized.

1. Remove the front door window regulator.
2. Remove the window regulator motor screws.
- To install, tighten to 7 Nm (62 lb-in).

3. Remove the front door window regulator motor.
4. To install, reverse the removal procedure.
5. If the work was carried out on the LF door, reinitialize the LF window regulator.