Deactivating/Activating The Door Lock Control Switch UNLOCK Button Inhibit

DEACTIVATING/ACTIVATING THE DOOR LOCK CONTROL SWITCH UNLOCK BUTTON INHIBIT

NOTE: The door lock control switch UNLOCK button inhibit feature needs to be enabled to perform this procedure.

This feature is customer-configurable. Steps one through three must be completed within 30 seconds.
1. Turn the key ON, then press UNLOCK three times.
2. Turn the key OFF, then press UNLOCK three times.
3. Turn the key ON.
4. Verify that the horn chirps. This indicates the enable/disable mode is ready to receive program changes.
5. Within five seconds, press the LOCK button twice.

Two horn chirps indicate the system is disabled. Two chirps, followed by the horn sounding, indicate the system is enabled.

Pressing the LOCK button twice again toggles the door lock control switch UNLOCK button inhibit feature state.

Turn the key OFF to exit the enable/disable programming mode.