Installation

1UR-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

(a) Apply a light coat of gasoline or spindle oil to a new O-ring and install the O-ring to the pressure regulator.

NOTICE:
* Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.
* When inserting the pressure regulator, be careful not to damage the O-ring.

(b) While turning the pressure regulator left and right, install it to the delivery pipe.





(c) Install the 2 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(d) Connect the No. 1 air hose to the pressure regulator.

(e) Connect the No. 2 fuel tube to the pressure regulator Service Precautions.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. INSTALL AIR CLEANER CAP AND HOSE Installation

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

5. INSPECT FOR FUEL LEAK Installation