Reassembly

INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY Installation

2. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation

3. INSTALL SIDE DEFROSTER DUCT ASSEMBLY LH

(a) Attach the 4 clips and claw to install the side defroster duct.

4. INSTALL SIDE DEFROSTER DUCT ASSEMBLY RH

HINT
Use the same procedure described for the LH side.

5. INSTALL NO. 1 METER HOOD RETAINER

HINT
Use the same procedure for the other No. 1 meter hood retainer.

(a) Install the No. 1 meter hood retainer with the screw [A].

6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR Installation

7. INSTALL SUNSHINE SENSOR HOLE COVER

(a) Attach the 2 claws to install the sunshine sensor hole cover.

8. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Attach the 18 clamps to install the No. 2 instrument panel wire.

(b) Connect the connector.

9. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

(a) Install the No. 1 defroster nozzle garnish with the 6 screws [A].

10. INSTALL INSTRUMENT PANEL CUSHION

(a) Install the instrument panel cushion.

11. INSTALL NO. 3 HEATER TO REGISTER DUCT

(a) Install the No. 3 heater to register duct with the 2 screws [A].

12. INSTALL DEFROSTER NOZZLE ASSEMBLY

(a) Install the defroster nozzle with the 4 screws [A].

13. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Attach the 2 claws to install the No. 1 side defroster nozzle duct.

(b) Install the screw [A].

14. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

HINT
Use the same procedure described for the No. 1 side defroster nozzle duct.

15. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the No. 1 heater to register duct with the 4 screws [A].

16. INSTALL NO. 2 HEATER TO REGISTER DUCT

HINT
Use the same procedure described for the No. 1 heater to register duct.